Cheers Rich,
I tried the ‘new way’ but my pics to big? I’ll try photobucket tomorrow. The new way seems simple but its the size of my pic thats the problem. I’ll get some advice from my boys on how to make the pics smaller if poss.
Mike
mikey1964:
Cheers Rich,I tried the ‘new way’ but my pics to big? I’ll try photobucket tomorrow. The new way seems simple but its the size of my pic thats the problem. I’ll get some advice from my boys on how to make the pics smaller if poss.
Mike
…
Mike if you read some of the quotes on the new way of sending pics it explains how to do it.It looks as though a few people have had the same problem.
Regards Jacko.
maybe…just maybe! New (1999) Macintyre & Scott Daf XF 380 4x2.
Yo! Stuart. I cant call you what we all know you as, I’d be chucked off here! But good to hear from you. Just come back from there, met up with Jelly too.
Yes relations with Eurohaul soured somewhat after that…Cash ONLY!
Another pic from Marc (Bubbleman)'s Scrapbook thread this time long gone Southampton Haulier Shamara
And one more try?
Copy of macscott.jpg.tif (170 KB)
mikey1964:
And one more try?0
…
Hello Mike
Cant see the photo your so close don’t give up!
Regards Jacko
stuart james:
oaa 249p was eurohauls oaa 250p was bakers, there were only 3 f89 320 6x4s in the country then sunters had the other one. i ended up cutting the axles out of 249p, and making it a normal unit. never finished it but it would have kicked up some smoke if it did make it back on the road. we had an f88 6x4 oow —m wianright will remember the reg. tipped on its side outside lorrians lorry park with 45-28 and a crane on its back, that ended it . we wedged it under a heavy load in the yard, princes took it in part ex for nick the greeks f10" ncg and the french f12 6x2 lift axle we had. princes didnt find it funy when the 88 turned up solo leaning over to one side in there yard. they woulnt let colenso have any more volvos expecally when they found out we registerd the f12 6x2 to french plates monkey spanner should remember that, they stopped us buying parts as well we had to pay cash for a while. colenso with cash"“” nig
…
Hello Stuart(cant call you by you’re nick name 
)
I don’t think you would remember me but i used to work with your brother Kev on Pitters.I remember seeing you around Stratford Lift in London when you drove A39 GRJ for Mo Baker.When you worked for Eurohaul do you remember a lad called Sean Wolfe i think he may have been a trailer fitter■■?
Regards Jacko
hi jacko wolfie worked in the warehouse at eurohaul, bye the way harry black was not right name. it was harry nash nickname was black harry you can use my nickname just shorten it to nig"“” see you in a bit tata.
Not sure if I posted these before. Barbours not strictly Southampton but spent enough time here! Havent seen any other fotos of them.
R-JACKO:
mikey1964:
And one more try?0…
Hello Mike
Cant see the photo your so close don’t give up!
Regards Jacko
I’ll try and work out where I’m going wrong Richie, I just can’t see how I got it on there but it won’t open■■?
Mike
‘Gazzer’, great pic of the 88 hanging off the trailer.
Look…
Ok, for some reason the format of the picture was a .jpg TIF image. Once I worked out how to drop the Tif and just have .jpg it worked. Worth the wait I hope but I’ll admit the older ones are better.
Mike
Hi Chaps
Just remember any can take your pics off of Tiny Pics
Me again
Sunters had at least 4 6x4 F89s HVN 396 N
GVN 995 R
NAJ 101 P
NAJ 102 P I think they had six but cant remember the reg of the other two plus they had a4x2 NAJ 99P
Peterborough had at least 1 as well Magnaload had 2 or more, Wynns had 2 which were purchased in 1977 but didnt go on the road until late 78 thus they were T reg AAX 542T & ABO 421 T.
Nig thanks for the info on that 1 of Eurohauls I shall now stop looking in scrap yards for it as a 6x4.
I have found one of their low loaders & its still in Hampshire with the same owner that purchased it from the auction.
Also we still have their ex 88 which dad ran for 18 years but the tin worm took over in the end. cheers Rich
mikey1964:
Look…
…
Well done Mike
Regards Jacko.
gazzer:
Not sure if I posted these before. Barbours not strictly Southampton but spent enough time here! Havent seen any other fotos of them.
Hi Gazzer, whats the story with the 88 slipping off the runway ??What you do that for R Jimski
ainacs:
You are welcome JimHere is a pic you were asking about this week!!
Remember this one■■?
HI, I drove this truck CLU 98T in Trans Oman livery for Lennie Smith (rip) in the late eighties.
Last heard of climbing a barrier in Italy and ending up in Mike Gates yard in Poole.
i have photos but am unsure how to post, but will try.
Regards to all that remember me.
Windy Miller.
Regards Pat
Hi all
I saw Tony Eldridge today and he gave me a couple of pics to put on here
The man himself (middle of pic) taking delivery of these 4 L reg I think Scania’s
ainacs:
Here you are Nobby a right rogues galleryFrom L to R
Mick Leach, Tony Hilton, John Lee and Bingo (John Dollery) R.I.P
Regards Pat
…
Hello Pat,Nobby(TIR)
Speaking to a family friend tonight the name Bingo Dollery R.I.P was mentioned.If this is the same Bingo he was quite a character .Mike said that Bingo would run steel to South Wales and reload coal in the early 60s.Mike said he would get a call from the POLICE asking Mike why his lorry was parked outside the TOPRANK 
If this is the same Bingo he also worked on Bulwark tankers but only lasted about year.Doing things like LIVERPOOL and back in a day
Regards Jacko.
Hello Pat,Nobby(TIR)
Speaking to a family friend tonight the name Bingo Dollery R.I.P was mentioned.If this is the same Bingo he was quite a character .Mike said that Bingo would run steel to South Wales and reload coal in the early 60s.Mike said he would often get a call from the POLICE asking Mike why his lorry was parked outside the TOPRANK If this is the same Bingo he also worked on Bulwark tankers but only lasted a year.Doing things like LIVERPOOL and back in a day
Regards Jacko.
[/quote]
Hi Jacko Liverpool and back in a day !!! thats ok thats legal…Look in the old log books 
see, easy !!! 
R Jimski