ANYBODY SHED SOME LIGHT ON THIS OLD LEYLAND SUPER BEAVER HBO 50 ONLY DONE 21000 MILES THE 600 IS LIKE A SWISS WATCH
Hi,
Don’t know anything about that motor,though bo is a welsh registration.
Regards andrew.
It looks like the sort of machine a big bus company would have bought new and kept in the corner of a garage for years. The Leyland badge on the grille is the type used on Leyland buses in the 1980s, by the look of it. What a find.
red with a blue chassis !,didnt suttons have this colour scheme ? 
I think it could have been one of the NCB mines rescue vehicles later modified.
5thDragoon:
I think it could have been one of the NCB mines rescue vehicles later modified.
HBO 503 AND 504 were used in South Wales, don’t know about 50. There is a photo of one preserved on Flickr.
THE SHOWMAN:
ANYBODY SHED SOME LIGHT ON THIS OLD LEYLAND SUPER BEAVER HBO 50 ONLY DONE 21000 MILES THE 600 IS LIKE A SWISS WATCH0
Leyland Super Beavers.
With respect,are you sure this isn’t HBO 504 and not HBO 50? This lorry looks familiar to me,and the DVLA
details of HBO 504 are as follows:-
The vehicle details for HBO 504 are:
Date of Liability
01 06 2006
Date of First Registration
05 11 1954
Year of Manufacture
1954
Cylinder Capacity (cc)
0cc
CO2 Emissions
Not Available
Fuel Type
HEAVY OIL
Export Marker
N
Vehicle Status
Unlicensed
Vehicle Colour
NOT STATED
Vehicle Type Approval
Not Available
Strangely,as far as I can see at the moment,there are no DVLA records of the Leyland Super Beaver,HBO 503 
Here is another photograph:-
flickr.com/photos/wyliefox/4 … 4479091927
BO is a Cardiff,Wales,registration,and here is a photograph of Leyland Super Beaver,HBO 504 in NBC
Mines Rescue livery:-
flickr.com/photos/29080235@N08/4955957259/
According to the comments on Flickr,both HBO 503 and HBO 504 were used as ballast road locomotives for
pulling drawbar trailers.
VALKYRIE.
Excellent research, Valkyrie.
HBO 503 AND 504 towing the winder.
Now, here’s a rare one!
It’s a Super Beaver assembled in Ashdod, Israel in 1972 with a locally produced cab.
I could never quite work out, with Super Beavers and Super Hippos, why some had a flat steering wheel while others had a steeply raked one. Was it to do with being 4x2 or 6x4, or could they be ordered with either? Robert
It might just be a different series ie the older ones might have had a more upright steering wheel. Here is a photo of one of the last Super Hippis ever to be delivered and it seems to have the same flattish wheel as the Super Bear. I will have a look at the data sheets when I locate them.
This model is a 30EH.7AR
If you can find the build specs I’d be interested in the diff ratios.
There’s a lot of hub protrusion (unless she’s on 900 tyres) which in my experience meant the extra large hubs which were the “low loader” 38mph ratio.
Tomdhu:
cargo:
If you can find the build specs I’d be interested in the diff ratios.
There’s a lot of hub protrusion (unless she’s on 900 tyres) which in my experience meant the extra large hubs which were the “low loader” 38mph ratio.Tomdhu:
We would normally fit 11.00x20 on these but there might just have been a shortage of these then we would very reluctantly fit 10.00x20 with a higher ply rating. The way these guys overloaded them would mean any 9.00’s wouldn’t last long.
cargo:
If you can find the build specs I’d be interested in the diff ratios.
There’s a lot of hub protrusion (unless she’s on 900 tyres) which in my experience meant the extra large hubs which were the “low loader” 38mph ratio.Tomdhu:
Hi Cargo,Didn’t find the specific Hippo/Beaver sheet but found the performance summary for all the old models with various GB and diff options from the Leyland Sales manual. Here they are the gradients and top speeds for the two models - both with the 7 speed wide ratio box on 11.00x20 16 ply tyres. First is in top then speed on O/Drive, in MPH.
S/Beaver (18EB1CR, 18EB2CR,18EBCR)
4.82 - 1 in 3.9, 56 and 73.5
6.06 - 1 in 2.9, 45 and 59
7.74 - 1 in 2.3, 35 and 46S/Hippo (30EH5R, 30EH6R)
4.82 - 1 in 6.7, 56 and 73.5
6.06 - 1 in 5.2, 45 and 59
7.74 - 1 in 4.0, 35 and 46
8.75 - 1 in 3.5, 31 and 42S/Hippo (30EH7R)
4.82 - 1 in 11.5, 56 and 73.5
6.06 - 1 in 8.7, 45 and 59
7.74 - 1 in 4.0, 35 and 46
8.75 - 1 in 3.5, 31 and 42It says also that the 8.74-1 ratio is not available if a trailing axle is fitted with either the 680 engine or a crawler gear.
There are two pages of this so I will scan them and email them to you.
Does anyone know the location of this lorry now. It was my dads. He recovered from Wales and did the work on it at his own garage. It is HBO504.
Hi, I believe I have the truck u are looking for! It’s been in storage for a number of years Just come across your post. If you would like anymore details please message me. Thank you.
Hi, I believe I have the truck u are looking for! It’s been in storage for a number of years Just come across your post. If you would like anymore details please message me. Thank you.
Hi,
do you have any photos or an address of where it can be viewed?
Thanks