December TRUCKING mag - Spot the mistake - NOW WITH PICTURE!

The latest TRUCKING dropped through my letterbox today. I was having the usual flick-through tonight before I study it from cover to cover, when I noticed something a little strange about the photo on page 70 of the Darley Ford Transport motors. Anyone notice anything peculiar in the picture :question: :question: :question:
I think someone’s been let loose with the Photoshop :wink:

Oh btw, not in a position to scan it right now, so you’ll have to go and buy one!

299 views and nobody’s spotted it yet?! :wink:

Roger Breaker:
299 views and nobody’s spotted it yet?!

That is because they were hoping to SEE it

Roger Breaker:
, not in a position to scan it right now

which is why there is that many views and no comments

Could it be that the DAF at the front doesn’t have any tax discs in the holders (clearly see on the cover pic)■■ Or is that just a non-photoshop thing I have just spotted!? :open_mouth:

Spill the beans!

ROG:

Roger Breaker:
299 views and nobody’s spotted it yet?!

That is because they were hoping to SEE it

Roger Breaker:
, not in a position to scan it right now

which is why there is that many views and no comments

BUY it ya cheapskate! :wink:
or at least flick through it in WH Smith. …or don’t, whatever!
Just thought a few on Trucknet may actually subscribe to Trucking, that’s all. Not all as sad as me I guess :wink:
I’m afraid that’s not the answer I was looking for Benni, but thank you for your input!

Could it be lack of drive axle on 09 Daf?All three wheels are the same. :laughing:

Roger Breaker:

ROG:

Roger Breaker:
299 views and nobody’s spotted it yet?!

That is because they were hoping to SEE it

Roger Breaker:
, not in a position to scan it right now

which is why there is that many views and no comments

BUY it ya cheapskate! :wink:
or at least flick through it in WH Smith. …or don’t, whatever!
Just thought a few on Trucknet may actually subscribe to Trucking, that’s all. Not all as sad as me I guess :wink:
I’m afraid that’s not the answer I was looking for Benni, but thank you for your input!

this is Trucknet UK no bankrobbers UK, truck drivers dont get paid enough to be able to buy trucking magazines as well as put food on the table :exclamation: :unamused: :unamused: :laughing: :laughing: :laughing: :stuck_out_tongue:

can someone scan it in :question: :question: my truck drivers meager wage cant buy magazines, shall have to rob a bank. :exclamation: :neutral_face: :cry: :cry: :cry:

extrucker:
Could it be lack of drive axle on 09 Daf?All three wheels are the same. :laughing:

Spot-on my man, 10 points! I guess you can afford your own copy now you’re an ‘extrucker’ :wink:

Sorry to have caused so much trouble and heartache with this post ( :exclamation: ), it’s just that my phone isn’t compatible with a scanner, and I wrongly assumed that a higher percentage of users would have access to industry press.

Next time I’m home I’ll be sure to scan it up for anyone who’s interested

I spotted that to. :wink: I thought an 8x2 was a bit much. :unamused: :open_mouth: :laughing:

removalboy:
I spotted that to. :wink: I thought an 8x2 was a bit much. :unamused: :open_mouth: :laughing:

Oh go on then, you can have 5 points, I trust ya :wink:

:grimacing: :grimacing: :grimacing: :grimacing: :grimacing: :grimacing: :grimacing: :grimacing: Yay :wink: :laughing:
I also get it through the post so can i have another 5 points :question: :wink: :laughing:

removalboy:
:mrgreen: :grimacing: :grimacing: :grimacing: :grimacing: :grimacing: :grimacing: :grimacing: Yay :wink: :laughing:
I also get it through the post so can i have another 5 points :question: :wink: :laughing:

Now you’re just taking the P-one-five-five! :wink:

Thought so :wink: :grimacing:

Roger Breaker:

is it me or does those yellow mudguards look like they been painted on using photoshop paint brush :question: :question:

and wouldnt that config reduce the weight the truck can pull :question: :confused:

groovy greg:
is it me or does those yellow mudguards look like they been painted on using photoshop paint brush :question: :question:

and wouldnt that config reduce the weight the truck can pull :question: :confused:

It would seriously reduce the weight it could pull, in fact it couldn’t pull anything as it doesn’t have a drive axle! Just looks like someone without much knowledge of trucks has been given the job of touching up the photo.
…Oh and the mudwings are genuinely yellow btw

if its a tri-steer i bet he can spin it round on a sixpence tho :smiley:

Roger Breaker:

groovy greg:
is it me or does those yellow mudguards look like they been painted on using photoshop paint brush :question: :question:

and wouldnt that config reduce the weight the truck can pull :question: :confused:

It would seriously reduce the weight it could pull, in fact it couldn’t pull anything as it doesn’t have a drive axle! Just looks like someone without much knowledge of trucks has been given the job of touching up the photo.
…Oh and the mudwings are genuinely yellow btw

no it wasnt the colour, if you look at the mudgards they look erm…blocky not smooth/rounded, looks like someone re touched them using yellow airbrush or maybe not.

Roger mores the point did you point this minor( :open_mouth: ) thing out to Trucking mag? that this truck can go nowhere because it has no drive axle :laughing:

groovy greg:
no it wasnt the colour, if you look at the mudgards they look erm…blocky not smooth/rounded, looks like someone re touched them using yellow airbrush or maybe not.

That’s where they’ve copied the image of the midlift and pasted it where the drive axle should be, along with bits of the battery box and the AdBlue filler for some strange reason :question: :exclamation: :confused: